Description
Description
Maretron Pressure Transducer — 0 to 50 PSI, Gauge Type (PT-0-50PSI-01)
A mid-range gauge-type transducer that connects to a Maretron FPM100 Fluid Pressure Monitor to put pressure readings on your NMEA 2000 network — sized for engine oil pressure, raw water pressure, and similar mid-range marine systems.
Why It's Worth It
For maximum accuracy, always use the transducer with the smallest range that's sufficient for your application — a 0-50 PSI transducer on a 40 PSI system gives you far better resolution than a 0-300 PSI unit on the same circuit. This gauge-type transducer measures pressure relative to atmospheric (not absolute), and has a vent tube in the connecting cable to maintain that reference — keep the vent tube end dry and unkinked or readings will drift.
Use
Thread into any 1/4" NPT female fitting. Install torque 133-177 in-lbs (15-20 Nm). If the monitored system is subject to pressure spikes or transients, install a PT-SNUB-01 pressure snubber first, then thread the transducer into the snubber's outlet. Connect the white wire to the positive (+) terminal and the brown wire to the negative (-) terminal of a free FPM100 channel. Not approved for use with gasoline — use a gasoline-rated transducer for fuel pressure monitoring.
Reviews (0)
Reviews (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Method: Qualifies for Ground and 2 Day
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
