{"product_id":"victron-energy-qua122305130","title":"Victron Quattro-II - 12\/3000 - 120-50\/50 - 2X 120V","description":"\u003cp\u003e\u003cstrong\u003eQuattro-II - 12\/3000 - 120-50\/50 - 2X 120V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and charger specifically designed for standard North American 50A 120\/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e120\/240V Input and Output, or 120V Input and Output (Always 120V Output When in Inverter Mode)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two AC inputs can be supplied from a split-phase 120\/240V source or a single-phase 120V source. When one of the AC sources is available, the Quattro will feed through the AC to its output. The output will therefore mirror the AC input.\u003c\/p\u003e\u003cp\u003eThe inverter\/charger connects to the neutral and the preferred input line (L1). The power needed to charge the batteries will therefore be drawn from L1.\u003c\/p\u003e\u003cp\u003eThe Quattro switches to inverter operation when no AC source is available. The inverter output is 120V single-phase. In invert mode, the Quattro connects both output lines (L1 and L2) together to provide 120VAC to loads on either line.\u003c\/p\u003e\u003cp\u003eAny 240V loads will therefore be supplied only when the Quattro is supplied by a split-phase AC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePowerControl and PowerAssist - Boosting the Capacity of the Grid or a Generator\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA maximum grid or generator current can be set. The Quattro will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).\u003c\/p\u003e\u003cp\u003ePowerAssist takes the principle of PowerControl to a further dimension. Where peak power is often required only for a limited period, the Quattro will compensate for insufficient generator, shore, or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery (available on L1 input only).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo AC Inputs and Two AC Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Quattro can be connected to two independent AC sources, for example,shore-side power and a generator, or two generators. The Quattro-II will automatically connect to the active source.\u003c\/p\u003e\u003cp\u003eThe main output has no-break functionality. The Quattro takes over the supply to the connected 120V loads in the event of a grid failure or when shore\/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without disruption. The transfer time of the L2 output is longer: approximately 40 milliseconds.\u003c\/p\u003e\u003cp\u003eThe second (auxiliary) output is live only when AC is available on the input of the Quattro. Loads that should not discharge the battery can be connected to this output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVirtually Unlimited Power Thanks to Parallel and Three-Phase Operation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUp to 6 Quattros can operate in parallel to achieve a higher power output. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase setups, L2 is disabled on all units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn-Site System Configuring, Monitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSettings can be changed in a matter of minutes with the VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface are needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, and Digital Multi Control Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote Configuration and Monitoring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstall a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45344688242870,"sku":"VIC\/QUA122305130","price":1377.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/6584\/6966\/files\/100132XL.jpg?v=1786227448","url":"https:\/\/ampedupmarine.com\/products\/victron-energy-qua122305130","provider":"Amped Up Marine","version":"1.0","type":"link"}