Description
Description
11-Pin Low-Frequency Mix & Match Cable for Raymarine
Some CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.
The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.
Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.
Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.
The same cables are used for all CHIRP transducers irrespective of their power rating.
Specifications
Specifications
Identification
| MPN | MMC-11R-LDB |
|---|---|
| Barcode | 801769003246 |
Reviews (0)
Reviews (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
Airmar
Airmar B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match Cable
B175C-0-L-MM
Airmar
Airmar B175H Bronze Thru Hull 0° Tilt - 1kW - Requires Mix and Match Cable
B175C-0-H-MM
Airmar
Airmar B175H Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
B175C-12-H-MM
Airmar
Airmar B175H Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
B175C-20-H-MM
Airmar
Airmar B175HW Bronze Thru Hull 0° Tilt - 1kW
B175C-0-HW-MM
Airmar
Airmar B175HW Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
B175C-12-HW-MM
Airmar
Airmar B175HW Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
B175C-20-HW-MM
Airmar
Airmar B175L 20° CHIRP Bronze Thru-Hull 1kW - Needs Mix & Match Cable
B175C-20-L-MM
Airmar
Airmar B175L Bronze 12 Degree Thru-Hull 1kW - Requires Mix & Match Cable
B175C-12-L-MM
Airmar
Airmar B175M Bronze Thru Hull 0° Tilt - 1kW - Requires Mix and Match Cable
B175C-0-M-MM
Airmar
Airmar B175M Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
B175C-12-M-MM
Airmar
Airmar B175M Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
B175C-20-M-MM
Airmar
Airmar B175MW Medium Ultra-Wide 20-Degree 1kW CHIRP Transducer Requires Mix & Match Cable
B175C-20-MW-MM
Airmar
Airmar B75H Bronze Chirp Thru Hull 0° Tilt - 600W - Requires Mix and Match Cable
B75C-0-H-MM
Airmar
Airmar B75H Bronze Chirp Thru Hull 12° 600W - Requires Mix & Match Cable
B75C-12-H-MM
Airmar
Airmar B75HW High Wide Chirp Transducer - 12 Degree Deadrise, 600W Thru Hull
B75C-12-HW-MM
Airmar
Airmar B75HW High Wide Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull
B75C-20-HW-MM
Airmar
Airmar B75M Bronze Chirp Thru Hull 0° Tilt - 600W - Requires Mix and Match Cable
B75C-0-M-MM
Airmar
Airmar B75M Bronze Chirp Thru Hull 12° Tilt - 600W - Requires Mix and Match Cable
B75C-12-M-MM
Airmar
Airmar B75M Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable
B75C-20-M-MM
Airmar
B75C-0-HW-MM
Airmar
B75C-12-L-MM
