KICKER KMA600.6 6 x 100W 6-Channel Weather-Resistant Full-Range Amplifier

Name: KICKER KMA600.6 6 x 100W 6-Channel Weather-Resistant Full-Range Amplifier
Brand: KICKER
SKU: KIC/48KMA6006
Price: 449.99 USD
Availability: InStock

SKU: KIC/48KMA6006

$449⁹⁹ $479⁹⁹

Same-Day Shipping Checking cutoff…

Description

KMA600.6 6 x 100W 6-Channel Weather-Resistant Full-Range Amplifier

Big sound meets big value. Use this flexible six-channel KM-Series marine amplifier to power up to three zones!

Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump on the Amp 3 channels. Powering as many as 12 speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.

Features:

Ultra-Efficient Class D Design
750 Watts of Dynamic Power
Three Zones of Control
Six-Channel Amplifier with Bridging Capability
Conformal-Coated Circuit Board
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
Real Marine™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware Included

Specifications

Identification

MPN	48KMA6006
Barcode	713034020387

Dimensions

Dimensions (H x W x D)	2.32" x 13.90" x 6.69" (59 x 353 x 170 mm)
Weight	-

Amplifier

Amplifier Class	Class D
Channels	6

Amplifier Power

Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD)	50 W x 6/200 W x 3 (Bridged)
Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD)	100 W x 6
Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD)	-
Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD)	-

Amplifier Processing

Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs	> 95 dB
Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs	75 dB
Signal-to-Noise Ratio (Manufacturer Rating)	-
Damping Factor @ 4 Ω	-
Damping Factor @ 2 Ω	-
THD+N @ rated power	-
Frequency Response (+0, -1dB)	10 Hz-20 kHz (+0, -1 dB)
Input Voltage Range @ RCA Inputs	125 mV-5 V (low level); 250 mV-10 V (high level)
Input Impedance	-
Remote Level Control	-
Remote Level Modes	-
Channel Input Mode Switch	-
Pass-through Preamp Output	-
Source Channel Selection for PreOuts	-

Amplifier Filters

Bass Boost EQ	0 to +6 dB @ 40 Hz (Channels 5 & 6 only)
Output Polarity Switch	-
Filter Mode(s): Channels 1 & 2	Off or High-Pass
Filter Slope(s): Channels 1 & 2	12 dB/octave
Filter Frequency Range: Channels 1 & 2	Off-200 Hz
Filter Mode(s): Channels 3 & 4	Off or High-Pass
Filter Slope(s): Channels 3 & 4	12 dB/octave
Filter Frequency Range: Channels 3 & 4	Off-200 Hz
Filter Mode(s): Channels 5 & 6	Off, High-Pass or Low-Pass
Filter Slope(s): Channels 5 & 6	12 dB/octave
Filter Frequency Range: Channels 5 & 6	50 Hz-200 Hz
High-Pass/Low-Pass Full Range Filter	-
HP Variable Crossover Frequency Range	-
LP Variable Crossover Frequency Range	-
Infrasonic Filter	25 Hz fixed (in Low-Pass mode)
Detented, Calibrated Filter Potentiometers	-

Electrical

Operating Voltage	10-16 VDC
Current Consumption (idle)	-
Current Consumption (standby)	-
Fuse Rating	80 A (external, sold separately)
Recommended Fuse Type(s)	-
Minimum Copper Power/Ground Wire Gauge	4 AWG