Description
Description
KPX500.1 1x500W Compact Mono Sub Amplifier
The KPX500.1 Mono Amplifier is purpose-built for anyone who needs big power with a tiny footprint. Make your bike bump without taxing your charging system.
The KPX500.1 Subwoofer Amp features a 24dB/octave variable low pass crossover and 24dB/octave variable subsonic filter to protect your subwoofers and precisely craft your sound. A wide range of input levels lets this amp easily hook up to virtually any factory or aftermarket radio on the market. To control your bass on the go, connect the optional CXARC remote.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob. This KPX500.1 Amplifier delivers as much as 500 watts into one channel.
Features:
- Extremely compact footprint
- Dedicated subwoofer amplifier
- Up to 500-plus watts of power
- Fits under motorcycle fairings
- Weather-resistant design
- Built-in crossover controls
- CXARC remote bass control compatible
Specifications
Specifications
Identification
| MPN | 51KPX5001 |
|---|
Dimensions
| Dimensions (H x W x D) | 1.69" x 8.54" x 3.62" (43 x 217 x 92 mm) |
|---|---|
| Weight | - |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 150 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 300 W x 1 |
| Rated Continuous (RMS) Power (14.4 V input @ 1 Ohm < 1% THD) | 500 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 90 dB |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | - |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | - |
| Frequency Response (+0, -1dB) | 10 Hz-160 Hz |
| Input Voltage Range @ RCA Inputs | 125 mV-5 V (low level); 1 V-40 V (high level) |
| Input Impedance | - |
| Remote Level Control | Optional (CXARC, sold separately) |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | 0 or +6 dB @ 40 Hz (selectable) |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Subwoofer Channel | Low-Pass |
| Filter Slope(s): Subwoofer Channel | 24 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 40 Hz-160 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | 10 Hz-40 Hz, 24 dB/octave |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 6-16 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 60 A (external) |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | 8 AWG |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reviews (0)
Reviews (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
