Description
Description
PT-24-8W Battery Charger
“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.
A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
Features:
- 24-volt model
- “Smart” circuitry provides three-stage charging – bulk, absorption, float
- Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
- Multiple isolated output banks; ammeter indicates total output current
- The optional sensor adjusts output voltage based on battery temperature
- Current limiting prevents damage from overloading
- Use as a power supply; can power loads without a battery in line
- Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
- Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
- Install in conjunction with PT-MCU for additional control and monitoring
- ABS-type approval for battery charging and power supplies
Specifications
Specifications
Identification
| MPN | PT-24-8W |
|---|
Temperature Rating References:
| Temperature | -10 degrees C to +60 degrees C |
|---|---|
| Note 1 | Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C |
Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):
| Gel-Cell | 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load |
|---|---|
| Flooded/AGM | 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load |
Compliance References:
| UL | UL 1950 (per DNB report) |
|---|---|
| CG | USCG CFR 183.410 (Ignition protected) |
| EN | EN 60335-1 |
| CE | Carries the CE mark |
| ABS | PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. |
Options:
| Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions | 3″ H x 4.75″ W) |
|---|
Reviews (0)
Reviews (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Method: Ground
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
