Victron Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet - 650W

SKU: VIC/PIN121800510
Precio de venta $27115 Precio normal $31900

Need This Product Installed?

We Offer Mobile Installation From West Palm Beach - Fort Pierce, FL

Click Here To Set Up Your Installation

Descripción

Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet - 650W

Inverters allow users to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC. 

*This inverter has a GFCI Duplex Outlet.

E.Direct Communication Port

The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook, and other devices
  • (VE.Direct Bluetooth Smart dongle needed)

Fully Configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level

Monitoring:

  • In- and output voltage, % load, and alarms

Proven Reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years.

The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High Start-Up Power

Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

ECO Mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.

LED Diagnosis

Please see the manual for a description.

To Transfer the Load to Another AC Source: The Automatic Transfer Switch

For Victron’s low-power inverters, they recommend the Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. 

Inverter Specifications:

  • Operating Temperature Range -40 to +65 degrees C (fan-assisted cooling) 

Enclosure Specifications:

  • Maximum Cable Cross-Section: 25 / 10 / 10mm² /  AWG4 / 8 / 8
  • Standard AC Outlets: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI

Accessories:

    Standards:

    • EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
    Please contact your dealer for any returns, repairs or support issues related to this product.

    Specifications

    Identification

    MPN PIN121800510
    Barcode 8719076049432

    General

    Dynamic cut-off load-dependent cut-off level
    DC Low Shut Down (adjustable) 9,3 / 18,6 / 37,2V
    DC Low Restart & Alarm (adjustable) 10,9 / 21,8 / 43,6V
    Battery Charged Detect (adjustable) 14,0 / 28,0 / 56,0V
    Max. Efficiency 90 / 90 / 91%
    Protection (2) a - f
    Battery-Connection Screw terminals
    Protection Category IP 21
    Remote On-off Yes
    Safety EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)

    Electrical

    Output voltage 210 245V
    Cont. Power at 25 degrees C (1) 800VA
    Cont. Power at 25 degrees C / 40 degrees C 650 / 560W
    Output AC Voltage / Frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
    Input Voltage Range 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V
    Zero-Load Power 6,5 / 7 / 9,5W
    Default Zero-Load Power in ECO Mode (default retry interval 1 / 1,5 / 3,0W
    ECO Mode Stop & Start Power Setting Adjustable

    Audio

    Peak Power 1500W

    Certifications & Protection

    Dynamic (load dependent) DC Low Shut Down (fully configurable) Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
    Automotive Directive ECE R10-4 1) Nonlinear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

    Physical

    Material & Color Steel chassis and plastic cover (blue Ral 5012)
    Weight 5,5kg / 12lbs
    Dimensions (H x W x D, mm) 105 x 230 x 325

    Control & Connectivity

    Automatic Transfer Switch Filax

    Reseñas (0)

    In The Box

    In The Box:

    Package Dimensions:

    15" x 12" x 8"

    Available Method: Ground

    Support