Looking For Mobile Installation In West Palm - Ft Pierce? Get Scheduled

$15 Flat Rate Ground Shipping - Free Shipping On Orders Over $1,000 *
ETA: Pending

Victron Lithium NG Smart Battery 24VDC - 200AH - Smart LifePO4 - 24V

SKU: VIC/BAT524120620
$2,83390 $3,33400

Need This Product Installed?

We Offer Mobile Installation From West Palm Beach - Fort Pierce, FL

Click Here To Set Up Your Installation

Descripción

Lithium NG Smart Battery 24VDC - 200AH - Smart LifePO4 - 24V

Victron Energy Lithium NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available in various capacities with nominal voltages of 12.8V, 25.6V, and 51.2V. They can be connected in series, parallel, and series/parallel so that a battery bank can be built for system voltages of 12V, 24V, or 48V. The maximum number of batteries in one system is 50, which results in a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system.

Integrated Shunt

The battery data (battery voltage, current, and temperature) are transmitted to the BMS and evaluated there, i.e., to calculate the state of charge, which can then be read out via VictronConnect or a GX communication center, or to create and issue specific warnings and alarms.

Automatic Setup, Monitoring, and Control via the VictronConnect App or a GX Device and the VRM Portal

The BMS automatically manages all battery parameters. The BMS automatically detects the system voltage and the number of batteries in parallel, series, and series/parallel connections. The BMS (from now on, Lynx Smart BMS NG 500 A/1000 A; further models to follow) is mandatory and must be purchased separately. Monitoring and control take place via VictronConnect (every BMS model has Bluetooth), a GX communication center, or the VRM Portal. Users can view battery parameters such as cell status, cell voltages, battery current, and temperatures in real-time. The battery firmware is automatically updated by the BMS.

Easy Bracket Mounting

Mounting brackets make the installation easier and ensure that the battery is optimally secured against slipping and tipping over.

Increased Ingress Protection (IP-rating)

The lithium-ion NG batteries are effectively sealed against dust and can withstand low-pressure water jets, making them suitable for environments where exposure to dust and water is a concern.

Low Self-Discharge Rate

The self-discharge rate has been significantly improved and is now a maximum of 2% of the battery capacity per month. A low self-discharge rate contributes to the overall performance, longevity, and reliability of the NG batteries.

Victon’s lithium-ion NG batteries have integrated cell balancing and cell monitoring. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS). 

Battery Management System (BMS) BMS will:

  • Generate a pre-alarm whenever the voltage of a battery cell decreases to less than 3.0 V
  • Disconnect or shut down the load whenever the voltage of a battery cell decreases to less than 2.8 V
  • Stop the charging process whenever the voltage of a battery cell increases to more than 3.6 V or when the temperature becomes too high or too low

Other Features:

  • Victron Smart products can connect through Bluetooth, USB/Wifi/LAN, or remotely via the internet

Specifications

Identification

MPN BAT524120620
Barcode 8719076058946

Voltage & Capacity:

Nominal Voltage 25.6 V
Nominal Capacity @ 25 °C 200 Ah
Nominal Energy @ 25 °C 5120 Wh
Discharge Current ≤1C N/A

Cycle Life (capacity ≥ 80 % of nominal):

80 % DoD 2,500 cycles
70 % DoD 3,000 cycles
50 % DoD 5,000 cycles

Discharge:

Max Continuous Discharge Current 200 A
Max Pulse Discharge Current (10s) 400 V
End of Discharge Voltage 22.4
Internal Resistance 2 mΩ

Charge:

Charge Voltage Between 14 V / 28 V / 56 V and 14,4 V / 28,8 V / 56,8 V
Float Voltage 13,5 V / 27 V 54 V
Max Continuous Charge Current 100 A
Max Pulse Charge Current (10s) 200 A

General:

BMS-es Lynx Smart BMS NG 500 A / 1000 A (M10 busbars), must be purchased separately
Cell Measurements Cell voltages and temperatures, battery current
Battery BMS Interface Male + female cable with M8 circular connector with high-speed digital communication, length 50 cm M8 extension cables are available separately for purchase in various lengths between 1 and 5 meters
Alarm Feature Pre-alarm contact on BMS
Bluetooth In the BMS
Max Batteries Per BMS 50 (384 kWh per BMS 3))
Battery Firmware Updates Battery firmware automatically updated by BMS
Repairable Yes (cover can be removed with screws)

Operating Conditions:

Operating Temperature Discharge: -20 °C to +50 °C | Charge: +5 °C to +50 °C
Storage Temperature -45 °C to +70 °C
Humidity (non-condensing) Max. 95 %
Protection Class IP65

Mounting:

Mounting Options Strap or mounting brackets
Can be Placed on Their Sides Yes

Other:

Self-Discharge Rate ≤ 3 % per month @ 25 °C
Power Connection M8 (threaded inserts and bolts)
Dimensions (H x W x D) mm 235 x 648 x 162
Weight (est.) 37 kg

Standards:

Safety Cells: UL1973 UL9540A IEC62619
EMC Battery: IEC  62619 (pending)
Automotive EN 61000-6-3, EN 61000-6-2
Performance IEC 62620 (pending)

Reseñas (0)

In The Box

In The Box:

Package Dimensions:

28" x 16" x 9"

Available Method: Truck Freight

Support

* ALL WARRANTY IS THROUGH MANUFACTURE *

Customers are saying

4.93 ★ (202)
Verified
Volver al principio