Cargando...
Relé de carga automática
Precio normal
$17799
Precio unitario
Descripción
Descripción
El relé de carga automática con aislamiento de arranque de Blue Sea Systems combina automáticamente los bancos de baterías durante el ciclo de carga y los aísla mientras se descargan, además de proteger los componentes electrónicos sensibles mediante el aislamiento temporal de las cargas de la casa del circuito del motor durante el arranque del motor. Proporciona 120 amperios continuos a 12/24 V, 210 A durante 2 minutos y 280 A durante un aumento repentino de 5 segundos. Protegido contra ignición para su uso a bordo de embarcaciones a gasolina. La salida LED remota indica el estado del relé fuera del ACR. La luz LED indica cuando se combinan las baterías. Admite alternadores de alto rendimiento de hasta 120 A. Las dimensiones son 3 7/8" de largo x 3 1/2" de ancho x 1 7/8" de alto. El relé tiene clasificación de resistencia al agua IP67 para inmersión temporal durante 30 minutos. Garantía de cinco años.
Specifications
Specifications
Identification
| MPN | 7610 |
|---|---|
| Barcode | 632085076108 |
Electrical
| Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronicsAutomatically combines battery banks during the charging cycle and isolates under discharge12/24 Volt auto ranging voltage inputWaterproof rated IP67 | temporary immersion for 30 minutesIgnition protected - safe for installation aboard gasoline powered boatsRemote LED output indicates relay state away from ACRLED light indicates when batteries are combinedLED blinks in undervoltage lockout and starting lockoutSupports high-output alternators up to 120 AmperesIncluded with the ADD A BATTERY Dual Circuit SystemAutomatically combines battery banks during the charging cycle and isolates under dischargeIgnition protected - safe for installation aboard gasoline-powered boatsActivates from any charging source - alternators, battery chargers, or solar panelsHermetically sealed contacts / vaporproofSide and bottom knockouts for power cable connectionsClip-on cover protects and insulates terminal connectionsTin-plated copper studs for maximum corrosion resistance7/8" (22.22mm) stud length to accept multiple cable terminals1/4" x 0.031" male quick connect terminals for ground and remote LED and starting interrupt |
|---|
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Method:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to 