Cargando...
Amplificador Monobloque Hertz Audio 1000w - HMD1
Precio normal
$99999
Total:
Precio unitario
SKU:
HTZ/78213010
Precio normal
$99999
Total:
Precio unitario
Descripción
Descripción
El amplificador mono HMD1 es la solución perfecta para añadir uno o más subwoofers marinos a su embarcación, siendo la extensión de potencia ideal para el HMD8 DSP. Es estable a 1 Ohmio y puede suministrar hasta 1000 W de potencia con unas dimensiones extremadamente compactas.
Specifications
Specifications
Identification
| MPN | 78213010 |
|---|---|
| Barcode | 8018823134132 |
Dimensions
| Dimensions (H x W x D) | 1.89" x 9.57" x 6.26" (48 x 243 x 159 mm) |
|---|---|
| Weight | 4.37 lbs (1.98 kg) |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (Manufacturer Rating @ 4 Ohm) | 500 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (Manufacturer Rating @ 2 Ohm) | 800 W x 1 |
| Rated Continuous (RMS) Power (Manufacturer Rating @ 1 Ohm) | 1000 W x 1 |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | 110 dBA (A-weighted, 1 V input) |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | 0.1% @ 1 kHz, 4 Ω, 70% rated power |
| Frequency Response (+0, -1dB) | 10 Hz-500 Hz (-1.5 dB) |
| Input Voltage Range @ RCA Inputs | - |
| Input Impedance | - |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | None |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Subwoofer Channel | - |
| Filter Slope(s): Subwoofer Channel | - |
| Filter Frequency Range: Subwoofer Channel | - |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 11-15 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 2 x 30 A |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | - |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
