Amplificador monobloque Hertz Audio Serie Venezia de 1260W - VENEZI...
Descripción
Descripción
Venezia V1 es el amplificador marino mono de Hertz más potente de la historia, ¡con 1260 W @ 1Ω estable! La tecnología Hertz Advanced Class D maximiza la eficiencia y la potencia mientras minimiza el calor y la radiación electromagnética. Venezia V1 está diseñado y probado para aplicaciones marinas (UV, niebla salina, vibraciones, alta/baja temperatura, choque térmico) y ha obtenido la certificación IPX2. Las conexiones de entrada, salida y alimentación Safe-Lock agilizan la instalación y mejoran la durabilidad en el campo. El sistema de refrigeración por convección sin ventilador está integrado en el chasis del disipador de calor fundido. El circuito de entrada totalmente diferencial balanceado rechaza el ruido electromagnético y las interferencias. Las potentes y flexibles opciones de filtro de preamplificación van mucho más allá de las capacidades de la mayoría de los amplificadores móviles. Por último, pero no menos importante, Venezia V1 está totalmente protegido contra cortocircuitos, sobrecargas y protección térmica, con reinicio automático.
Specifications
Specifications
Identification
| MPN | 78250020 |
|---|---|
| Barcode | 8018823138833 |
Dimensions
| Dimensions (H x W x D) | 2.13" x 10.63" x 7.28" (54 x 270 x 185 mm) |
|---|---|
| Weight | 6.00 lbs (2.72 kg) |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 700 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 1260 W x 1 |
| Rated Continuous (RMS) Power (14.4 V input @ 1 Ohm < 1% THD) | 1260 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | 102 dB (A-weighted, 1 V reference) |
| Damping Factor @ 4 Ω | 500 @ 100 Hz |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | < 0.02% @ 100 Hz, 4 Ω, 70% rated power |
| Frequency Response (+0, -1dB) | 10 Hz-500 Hz (-3 dB) |
| Input Voltage Range @ RCA Inputs | 0.2-5 V RMS |
| Input Impedance | 10 kΩ |
| Remote Level Control | Optional HRC BM2 (-20 dB to +6 dB) |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | Yes |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Subwoofer Channel | Adjustable |
| Filter Slope(s): Subwoofer Channel | - |
| Filter Frequency Range: Subwoofer Channel | - |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | Yes |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 11-15 VDC |
|---|---|
| Current Consumption (idle) | 1 A |
| Current Consumption (standby) | 0.04 mA |
| Fuse Rating | - |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | - |
General
| Water/Dust Protection Rating | IPX2 (vertical install, connections facing down) |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | Short-circuit, overload, thermal (auto-reset) |
Warranty/Certifications
| Certifications | ASTM-B117 salt fog compliant |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
Hertz Audio
Perilla de graves Hertz Audio - HRC BM2
78270031
