Cargando...
Amplificador monobloque Hertz Audio de 300 W - HMP-1D
Precio normal
$39999
Total:
Precio unitario
SKU:
HTZ/78270000
Precio normal
$39999
Total:
Precio unitario
Descripción
Descripción
Gracias al chasis de aluminio fundido ultracompacto (con certificación IP64), los amplificadores HMP 1D son resistentes a la intemperie, lo que los convierte en la opción ideal para instalaciones en vehículos UTV/ATV y motocicletas. Cuentan con una increíble relación potencia/tamaño y una fácil configuración gracias al filtro crossover integrado. La sección frontal presenta un sistema crossover completo y anulable, lo que proporciona una flexibilidad total de diseño del sistema, con o sin procesadores externos, ofreciendo al usuario infinitas posibilidades de conexión con cualquier fuente. Las entradas cuentan con un circuito balanceado especial que garantiza un alto rechazo a las interferencias electromagnéticas para obtener resultados libres de ruido. El nivel de los amplificadores HMP 1D puede controlarse de forma remota con el HRC BM (Hertz Remote Control Bass Management) incluido. Conectado a la toma de control remoto, esto permite un control del nivel de volumen extremadamente preciso desde la comodidad de su asiento.
Specifications
Specifications
Identification
| MPN | 78270000 |
|---|---|
| Barcode | 8018823122139 |
Dimensions
| Dimensions (H x W x D) | 1.72" x 8.78" x 3.96" (44 x 223 x 100 mm) |
|---|---|
| Weight | 2.98 lbs (1.35 kg) |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 150 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 250 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | 105 dB (A-weighted, 1 V reference) |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | 0.1% @ 100 Hz, 4 Ω |
| Frequency Response (+0, -1dB) | 10 Hz-500 Hz |
| Input Voltage Range @ RCA Inputs | Low: 0.2-5 V RMS / High: 0.8-20 V RMS |
| Input Impedance | - |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | None |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Subwoofer Channel | - |
| Filter Slope(s): Subwoofer Channel | - |
| Filter Frequency Range: Subwoofer Channel | - |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 11-15 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 1 x 15 A |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | - |
General
| Water/Dust Protection Rating | IP64 |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | ASTM D4329 (UV) and ASTM B117 (salt fog) |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
