Cargando...
Amplificador de 4 canales Hertz Audio serie HMP de 600W - HMP 4D
Precio normal
$39999
Total:
Precio unitario
SKU:
HTZ/78270020
Precio normal
$39999
Total:
Precio unitario
Descripción
Descripción
Gracias al chasis de aluminio fundido ultracompacto (con certificación IP64), el amplificador HMP 4D es resistente a la intemperie, lo que lo convierte en la elección ideal para instalaciones en UTV/ATV y motocicletas. Presenta una increíble relación potencia/tamaño y una configuración sencilla gracias al filtro de crossover integrado. La sección frontal cuenta con un sistema de crossover completo y anulable, lo que proporciona una flexibilidad total en el diseño del sistema con o sin procesadores externos, ofreciendo al usuario infinitas posibilidades de conexión con cualquier fuente. Las entradas cuentan con un circuito balanceado especial que garantiza un alto rechazo a las interferencias electromagnéticas para obtener resultados libres de ruido.
Specifications
Specifications
Identification
| MPN | 78270020 |
|---|---|
| Barcode | 8018823122146 |
Dimensions
| Dimensions (H x W x D) | 1.72" x 8.78" x 3.96" (44 x 223 x 100 mm) |
|---|---|
| Weight | 2.98 lbs (1.35 kg) |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 4 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 50 W x 4/130 W x 2 (Bridged) |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 65 W x 4 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | 95 dB (A-weighted, 1 V reference) |
| Damping Factor @ 4 Ω | 45 @ 100 Hz |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | 0.2% @ 100 Hz, 4 Ω |
| Frequency Response (+0, -1dB) | 10 Hz-30 kHz |
| Input Voltage Range @ RCA Inputs | Low: 0.2-5 V RMS / High: 0.8-20 V RMS |
| Input Impedance | - |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | Yes (selectable) |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Channels 1 & 2 | Off, Low-Pass or High-Pass |
| Filter Slope(s): Channels 1 & 2 | 12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 | 65/85/115 Hz |
| Filter Mode(s): Channels 3 & 4 | Off, Low-Pass or High-Pass |
| Filter Slope(s): Channels 3 & 4 | 12 dB/octave |
| Filter Frequency Range: Channels 3 & 4 | 65/85/115 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 11-15 VDC |
|---|---|
| Current Consumption (idle) | 1.2 A |
| Current Consumption (standby) | 0.04 mA |
| Fuse Rating | 1 x 15 A |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | - |
General
| Water/Dust Protection Rating | IP64 |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | Short-circuit, thermal (auto-reset) |
Warranty/Certifications
| Certifications | ASTM D4329 (UV) and ASTM B117 (salt fog) |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
