Icom HF Automatic Antenna Tuner f/IC-M802-01
Descripción
Descripción
HF Automatic Antenna Tuner for IC-M802-01
Suitable for many vessels
The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
Automatic tuning
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR at any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power and is perfect for maritime mobile operations.
Weather Resistant
The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers
Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Quick tune-up
Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick, trouble-free frequency changes.
Low power tune-up
The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
Specifications
Specifications
Identification
| MPN | AT130 |
|---|---|
| Barcode | 731797000729 |
Physical
| Dimensions | 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included) |
|---|---|
| Weight | 2.7 kg; 6.0 lb |
Performance
| Usable Temperature Range | -30 °C +60 °C |
|---|---|
| Frequency Coverage | 1.630 MHz (with the antenna length 7 m (23 ft) or longer) |
| Input Impedance | 50 ohms (unbalanced) |
| Auto Tuning Accuracy | VSWR 2.0:1 |
Electrical
| Rated Voltage | 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver) |
|---|---|
| Current Drain (at 13.6 V DC) | 2 A |
| Max. Input Power | 150 W (PEP) |
| Input Power During Tuning | 10 W |
General
| Auto Tuning Time | 1.5 sec. (returning for a memorized frequency), typically 23 sec. (when the operating band has been changed) |
|---|---|
| Insertion Loss | 0.5 dB (with a 50 ohms load, after tuning) |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Method:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
