Descripción
Descripción
Esta potente unidad compacta de múltiples canales emplea nuestro diseño de conmutación de control de ciclo único y tecnología RIPS para brindar 150 W x 4 o 300 W x 2. La regulación estricta de la fuente de alimentación mantiene baja la distorsión y maximiza la calidad del sonido.
Al utilizar el MHD750/1 para controlar un sistema de subwoofer, el MHD600/4 es el amplificador satélite ideal, ya que ofrece una gran dinámica con una resolución impecable. También se puede utilizar por sí solo como un amplificador de sistema de 3 canales muy capaz con 150 W x 2 para los satélites y 300 W x 1 para un sistema de subwoofer.
Este amplificador marino presenta acabados con pintura en polvo blanca y gris, una cubierta con juntas para los controles y herrajes de acero inoxidable para mayor durabilidad en el entorno marino.
Specifications
Specifications
Identification
| MPN | 010-03319-00 |
|---|---|
| Barcode | 699440982245 |
Dimensions
| Height | 1.93" (49 mm) |
|---|---|
| Width | 10.74" (273 mm) |
| Depth | 7.85" (199 mm) |
Audio
| Amplifier Class | Class D |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 150 W x 4/300 W x 2 (Bridged) |
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 150 W x 4/300 W x 2 (Bridged) |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | 150 W x 4/300 W x 2 (Bridged) |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | 150 W x 4/300 W x 2 (Bridged) |
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 110 dB |
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 88.2 dB |
| Damping Factor @ 4 Ω | > 300/50 Hz |
| Damping Factor @ 2 Ω | > 150/50 Hz |
| THD+N @ rated power | < 0.03% @ 4 Ω |
| Frequency Response (+0, -1dB) | 6 Hz-30 kHz |
| Input Voltage Range @ RCA Inputs | Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High) |
| Fuse Rating | 50 A |
| Recommended Fuse Type(s) | AFS, AGU or MaxiFuse™ |
| Minimum Copper Power/Ground Wire Gauge | 4 AWG wire |
General
| Operating Voltage | 11-14.5 VDC (12 V Models) |
|---|
Signal Processing
| Filter Mode(s): Channels 1 & 2 | Off, Low-Pass or High-Pass |
|---|---|
| Filter Slope(s): Channels 1 & 2 | 12/24 dB/octave |
| Filter Frequency Range: Channels 1 & 2 | 50 Hz-500 Hz |
| Filter Mode(s): Channels 3 & 4 | Off, Low-Pass or High-Pass |
| Filter Slope(s): Channels 3 & 4 | 12/24 dB/octave |
| Filter Frequency Range: Channels 3 & 4 | 50 Hz-500 Hz |
| Detented, Calibrated Filter Potentiometers | Yes |
| Remote Level Control | Optional (HD-RLC) |
| Remote Level Modes | 2 or All Channels |
| Channel Input Mode Switch | Yes (2/4 Channels) |
| Pass-through Preamp Output | Buffered |
| Source Channel Selection for PreOuts | Yes |
Warranty/Certifications
| Warranty | 3 Years |
|---|
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *









