Descripción
Descripción
MX Series 300w Monoblock Wide-Range Amplifier - MX300/1
PLAY ANYWHERE
With efficient NexD™ technology and a water-resistant chassis, MX amplifiers produce loads of clean power and are ideal for applications where moisture cannot be completely avoided.
- Designed for limited space applications
- Shock-resistant, water-resistant and built tough
- Efficient design for high output uses less energy
- Complete signal processing sections on board
- Exceeds international standards for salt fog and UV exposure
- 3-Year warranty
Power To Go Anywhere
Housed in a tiny cast-aluminum chassis, MX amps are rugged, water-resistant (IPX7-rated) and ready to go where conventional amplifiers wouldn’t dare.
NEXD Advantage
The highly efficient Class-D design reduces current draw and heat while generating loads of high-fidelity sound without straining small charging systems.
Complete Signal Processing
For easy setup and system flexibility, a complete set of onboard filters and signal processing features is concealed behind every MX amplifier’s water-resistant control cover.
Differential-Balanced Inputs
A versatile design accepts speaker level signals without a line-output converter — and delivers outstanding noise rejection while preventing alternator whine and other noises.
Built for the Elements
The all-aluminum, powder-coated housing with marine-grade hardware inhibits corrosion, and a water-resistant security cover protects all controls from the harshest of seasons.
Specifications
Specifications
Identification
| MPN | 010-03324-00 |
|---|---|
| Barcode | 699440984065 |
Dimensions
| Height | 1.77" (45 mm) |
|---|---|
| Width | 8.66" (220 mm) |
| Depth | 3.09" (78.5 mm) |
| Weight | 3.18 lbs (1.44 kg) |
Audio
| Amplifier Class | Class D |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 160 W x 1 |
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 300 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | 160 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | 250 W x 1 |
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 85 dB |
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 64 dB |
| Damping Factor @ 4 Ω | > 120/50 Hz |
| Damping Factor @ 2 Ω | > 75/50 Hz |
| THD+N @ rated power | < 1% @ 2 Ω per Channel |
| Frequency Response (+0, -1dB) | 20 Hz-20 kHz |
| Input Voltage Range @ RCA Inputs | Switchable from 250 mV-4 V RMS (Low) to 750 mV-15 V RMS (High) |
| Fuse Rating | 30 A |
| Recommended Fuse Type(s) | AFS, AGU or MaxiFuse™ |
| Minimum Copper Power/Ground Wire Gauge | 8 AWG wire |
General
| Operating Voltage | 11-15 VDC |
|---|---|
| Water and Dust Rating | IPX7 |
Signal Processing
| Filter Mode(s): Channels 1 & 2 | Off or Low-Pass only |
|---|---|
| Filter Slope(s): Channels 1 & 2 | 12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 | 40 Hz-400 Hz |
| Bass Boost EQ (0 to +12 dB @ 45 Hz) | 0 to +12 dB @ 43 Hz |
| Detented, Calibrated Filter Potentiometers | Yes |
| Remote Level Control | Optional (RBC-1) |
| Output Polarity Switch | Yes |
Warranty/Certifications
| Warranty | 3 Years |
|---|
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *





