Site Under Maintenance

Safe-T-Alert 62 Series Marine Carbon Monoxide - Flush Mount - White - 12V w/Trim Ring

SKU: SAF/62-542-TR-WT-M
Precio normal $9995

Need This Product Installed?

We Offer Mobile Installation From West Palm Beach - Fort Pierce, FL

Click Here To Set Up Your Installation

Descripción

62 Series Marine Carbon Monoxide - Flush Mount - White - 12V with Trim Ring

Features:

  • This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
  • NMMA Listed Component.
  • Space Saving design works in harsh marine environments.
  • Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
  • No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
  • Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
  • Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
  • End of Life Signal alerts boater to replace the alarm after 5 years of service.
  • Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
  • The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.

Specifications

Identification

MPN 62-542-TR-WT-M
Barcode 715456632483

General

Note 1 Conforms To ANSI / UL STD 2034*
* Testing Laboratory ETL/Intertek
Alarm Point 400 PPM 4-15 Minutes
Note 2 Low voltage power warning at 7 Volts
Operational Range 13.8 Volts +/-15%
Note 3 Low voltage power warning at 7 Volts
Operating Temperature -40°F to +158°F

Electrical

Power Supply and Current Draw 37 mA @ 13.8 VDC

Physical

Case Size 4.5″W x 3.25″H x 1.25″D

Reseñas (0)

In The Box

In The Box:

Package Dimensions:

10" x 9" x 2"

Available Method: Ground

Support