Victron Orion-TR DC-DC Converter - 12 VDC to 12 VDC - 9AMP Isolated

Name: Victron Orion-TR DC-DC Converter - 12 VDC to 12 VDC - 9AMP Isolated
Brand: Victron Energy
SKU: VIC/ORI121210110R
Price: 63.75 USD
Availability: InStock

SKU: VIC/ORI121210110R

$63⁷⁵ $75⁰⁰

Same-Day Shipping Checking cutoff…

Need This Product Installed?

We Offer Mobile Installation From West Palm Beach - Fort Pierce, FL

Click Here To Set Up Your Installation

Descripción

Orion-TR 12/12-9A (110W) Isolated DC-DC Converter

Remote On/Off Terminal

The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch.

All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current

An unlimited number of units can be connected in parallel.

High Temperature Protected

The output current will reduce at high ambient temperatures.

IP43 Protection

When installed with the screw terminals oriented downward.

Screw Terminals

No special tools are needed for installation.

Input Fuse (not replaceable)

On 12 V and 24 V input models only.

Adjustable Output Voltage

Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).

Specifications

Identification

MPN	ORI121210110R
Barcode	8719076016878

Electrical

Input Voltage Range	8-17 V
Under Voltage Shut Down	7 V
Under Voltage Restart	7.5 V
Nominal Output Voltage	12.2 V
Output Voltage Adjust Range	10-15 V
Output Voltage Tolerance	+/- 0,2 V
Output Noise	2 mV rms
Cont. Output Current at Nominal Output Voltage and 40 Degrees C	9 A
Maximum Output Current (10 S) at Nominal Output Voltage	12.5 A
Short Circuit Output Current	32 A
Cont. Output Power at 25 Degrees C	110 W
Cont. Output Power at 40 Degrees C	85 W
No Load Input Current (2)	< 50 mA
Current Consumption	< 200uA when disabled via its remote port

General

Efficiency	87 %
Galvanic Isolation	200 VDC between input, output, and case
Humidity	Max. 95 % non-condensing
DC Connection	Screw terminals
Maximum Cable Cross-Section	6 mm² AWG10
Safety Standards	EN 60950
Immunity Standards	EN 61000-6-3, EN 61000-6-1, EN 55014-2
Automotive Directive Standards	ECE R10-5