Freedom Communication Card Connector

Xantrex 20-Pin Communications Harness — 10" Lead (808-0820)

A 20-pin mating connector assembly with 10" bare wire leads that connects to the communications port on Freedom X PRO, XC PRO, and Freedom EX 4000 inverter/chargers — enabling ignition control and CAN bus/RV-C display integration.

Why It's Worth It
The 20-pin CC port on compatible Xantrex inverter/chargers isn't useful without a mating connector assembly to break out the individual signals. This harness provides that connector with 10" of pre-wired leads, letting you wire the ignition control (ACC) signal and CAN bus/RV-C display connections cleanly to your installation without soldering directly onto the inverter's port. The ignition control wire lets you turn the inverter on and off via the vessel's ignition switch or a separate control signal; the three CAN bus wires connect to any RV-C or J1939 compatible display or controller.

Use
Plugs into the 20-pin CC port on the Freedom X 1200 PRO (806-1212-05), Freedom XC PRO series, and Freedom EX 4000 (820-4080-41). The 10" bare wire leads connect to your ignition control circuit (1 wire) and CAN bus/RV-C display network (3 wires). For RV-C or NMEA 2000 network integration, pair with the Freedom X Combox (808-0822) or Xantrex Gateway (808-1888).

In The Box:

808-0820 20-Pin Communications Harness with 10" Leads

Package Dimensions/Shipping:

Product Support:

Subscription Information:

Release Date:

Warranty:

* ALL WARRANTY IS THROUGH MANUFACTURE *